• CRI-FO Series are cylinders with a hollow center. Designed for cable tensioning operations, positioning bars in tensile structures, pulley assembly and disassembly, hoisting, and cable and tie rod pulling tests. Tensioning bars, dywidag, macalloy.• With the oil return system strokes can be longer than in cylinders with a spring return. Thanks to the oil return system, return times are shorter and under all operating conditions.• With the threaded body cylinder positioning is easier, more accurate and safer.• The stop ring not only guarantees maximum operator safety, preventing plunger over-stroke, but also outstanding eccentric load absorption.• Hollow, high-strength, splined removable head.• The wiper reduces contamination between ring and rod.• Models weighing more than 20 kg are equipped with a handle or lifting eyebolts to make them easier to carry.• Custom made cylinders with a hollow center can be manufactured on customer request.

• CRI-FO Series are cylinders with a hollow center. Designed for cable tensioning operations, positioning bars in tensile structures, pulley assembly and disassembly, hoisting, and cable and tie rod pulling tests. Tensioning bars, dywidag, macalloy.• With the oil return system strokes can be longer than in cylinders with a spring return. Thanks to the oil return system, return times are shorter and under all operating conditions.• With the threaded body cylinder positioning is easier, more accurate and safer.• The stop ring not only guarantees maximum operator safety, preventing plunger over-stroke, but also outstanding eccentric load absorption.• Hollow, high-strength, splined removable head.• The wiper reduces contamination between ring and rod.• Models weighing more than 20 kg are equipped with a handle or lifting eyebolts to make them easier to carry.• Custom made cylinders with a hollow center can be manufactured on customer request.

• CRI-FO Series are cylinders with a hollow center. Designed for cable tensioning operations, positioning bars in tensile structures, pulley assembly and disassembly, hoisting, and cable and tie rod pulling tests. Tensioning bars, dywidag, macalloy.• With the oil return system strokes can be longer than in cylinders with a spring return. Thanks to the oil return system, return times are shorter and under all operating conditions.• With the threaded body cylinder positioning is easier, more accurate and safer.• The stop ring not only guarantees maximum operator safety, preventing plunger over-stroke, but also outstanding eccentric load absorption.• Hollow, high-strength, splined removable head.• The wiper reduces contamination between ring and rod.• Models weighing more than 20 kg are equipped with a handle or lifting eyebolts to make them easier to carry.• Custom made cylinders with a hollow center can be manufactured on customer request.

• CRI-FO Series are cylinders with a hollow center. Designed for cable tensioning operations, positioning bars in tensile structures, pulley assembly and disassembly, hoisting, and cable and tie rod pulling tests. Tensioning bars, dywidag, macalloy.• With the oil return system strokes can be longer than in cylinders with a spring return. Thanks to the oil return system, return times are shorter and under all operating conditions.• With the threaded body cylinder positioning is easier, more accurate and safer.• The stop ring not only guarantees maximum operator safety, preventing plunger over-stroke, but also outstanding eccentric load absorption.• Hollow, high-strength, splined removable head.• The wiper reduces contamination between ring and rod.• Models weighing more than 20 kg are equipped with a handle or lifting eyebolts to make them easier to carry.• Custom made cylinders with a hollow center can be manufactured on customer request.

• CRI-FO Series are cylinders with a hollow center. Designed for cable tensioning operations, positioning bars in tensile structures, pulley assembly and disassembly, hoisting, and cable and tie rod pulling tests. Tensioning bars, dywidag, macalloy.• With the oil return system strokes can be longer than in cylinders with a spring return. Thanks to the oil return system, return times are shorter and under all operating conditions.• With the threaded body cylinder positioning is easier, more accurate and safer.• The stop ring not only guarantees maximum operator safety, preventing plunger over-stroke, but also outstanding eccentric load absorption.• Hollow, high-strength, splined removable head.• The wiper reduces contamination between ring and rod.• Models weighing more than 20 kg are equipped with a handle or lifting eyebolts to make them easier to carry.• Custom made cylinders with a hollow center can be manufactured on customer request.

• CRI-FO Series are cylinders with a hollow center. Designed for cable tensioning operations, positioning bars in tensile structures, pulley assembly and disassembly, hoisting, and cable and tie rod pulling tests. Tensioning bars, dywidag, macalloy.• With the oil return system strokes can be longer than in cylinders with a spring return. Thanks to the oil return system, return times are shorter and under all operating conditions.• With the threaded body cylinder positioning is easier, more accurate and safer.• The stop ring not only guarantees maximum operator safety, preventing plunger over-stroke, but also outstanding eccentric load absorption.• Hollow, high-strength, splined removable head.• The wiper reduces contamination between ring and rod.• Models weighing more than 20 kg are equipped with a handle or lifting eyebolts to make them easier to carry.• Custom made cylinders with a hollow center can be manufactured on customer request.

• CRI-FO Series are cylinders with a hollow center. Designed for cable tensioning operations, positioning bars in tensile structures, pulley assembly and disassembly, hoisting, and cable and tie rod pulling tests. Tensioning bars, dywidag, macalloy.• With the oil return system strokes can be longer than in cylinders with a spring return. Thanks to the oil return system, return times are shorter and under all operating conditions.• With the threaded body cylinder positioning is easier, more accurate and safer.• The stop ring not only guarantees maximum operator safety, preventing plunger over-stroke, but also outstanding eccentric load absorption.• Hollow, high-strength, splined removable head.• The wiper reduces contamination between ring and rod.• Models weighing more than 20 kg are equipped with a handle or lifting eyebolts to make them easier to carry.• Custom made cylinders with a hollow center can be manufactured on customer request.

ST100A is high performance thermal dispersion technology gas flow meter that combines the most feature- and function- rich electronics, and innovations such as FCI patented Adaptive Sensing Technology™ (AST™), with the industry's most advanced flow sensors such as FCI patented "FPC" flow element for compressed air flow and new "wet gas" sesnor to achieve a truly state-of-the-science flow metering solution for industrial processes and plant applications.The ST100A series transmitter is unsurpassed in meeting your current and future need for outputs, process information and communications. Whether your output needs are traditional 4-20 mA analog, frequency/pulse, or advanced digital bus communications such as HART, Foundation fieldbus, PROFIBUS, or Modbus, ST100A has you covered. ST100A's bus communications have been certified by and are registered devices with HART and Foundation Fieldbus. In addition, Emerson Process (Delta V), Yokogawa and ABB (800xA) (see page 6) have tested and verified ST100A Series' Foundation Fieldbus interoperability with their systems.  Then there's ST100A's display/readout, which brings new meaning to the term process information. Simply, the ST100A's graphical display provides the most comprehensive information on the process measurements and conditions of any thermal flow meter available - see the ST100A close-up page for all the details.To complete the solution, ST100A flow elements and process connections ensure the best possible measurements and effective installation. FCI flow element designs have been perfected and optimized through six decades of R&D and real world experience in thermal dispersion technology and flow metering applications. With thermal dispersion there are no moving parts to foul or clog. This results in the greatest reliability and valuable savings on maintenance.Fast response, accuracy, repeatability and long-life are hallmarks of FCI flow elements available with ST100A. And, all new are the STP models, which add pressure measurement. Mass flow, temperature and pressure in a single tap-point thermal dispersion meter… An industry first and FCI exclusive! Then, consider other ST100A Series exclusives like dual-element measuring systems and FCI’s patented VeriCal option that provides significant cost and time savings by performing dynamic calibration verification in-situ, without ever removing the instrument from the process. To ensure both ease of installation and a match with your process conditions, ST100A offers a comprehensive selection of process connections and installation options.

ST100A is high performance thermal dispersion technology gas flow meter that combines the most feature- and function- rich electronics, and innovations such as FCI patented Adaptive Sensing Technology™ (AST™), with the industry's most advanced flow sensors such as FCI patented "FPC" flow element for compressed air flow and new "wet gas" sesnor to achieve a truly state-of-the-science flow metering solution for industrial processes and plant applications.The ST100A series transmitter is unsurpassed in meeting your current and future need for outputs, process information and communications. Whether your output needs are traditional 4-20 mA analog, frequency/pulse, or advanced digital bus communications such as HART, Foundation fieldbus, PROFIBUS, or Modbus, ST100A has you covered. ST100A's bus communications have been certified by and are registered devices with HART and Foundation Fieldbus. In addition, Emerson Process (Delta V), Yokogawa and ABB (800xA) (see page 6) have tested and verified ST100A Series' Foundation Fieldbus interoperability with their systems.  Then there's ST100A's display/readout, which brings new meaning to the term process information. Simply, the ST100A's graphical display provides the most comprehensive information on the process measurements and conditions of any thermal flow meter available - see the ST100A close-up page for all the details.To complete the solution, ST100A flow elements and process connections ensure the best possible measurements and effective installation. FCI flow element designs have been perfected and optimized through six decades of R&D and real world experience in thermal dispersion technology and flow metering applications. With thermal dispersion there are no moving parts to foul or clog. This results in the greatest reliability and valuable savings on maintenance.Fast response, accuracy, repeatability and long-life are hallmarks of FCI flow elements available with ST100A. And, all new are the STP models, which add pressure measurement. Mass flow, temperature and pressure in a single tap-point thermal dispersion meter… An industry first and FCI exclusive! Then, consider other ST100A Series exclusives like dual-element measuring systems and FCI’s patented VeriCal option that provides significant cost and time savings by performing dynamic calibration verification in-situ, without ever removing the instrument from the process. To ensure both ease of installation and a match with your process conditions, ST100A offers a comprehensive selection of process connections and installation options.

ST100A is high performance thermal dispersion technology gas flow meter that combines the most feature- and function- rich electronics, and innovations such as FCI patented Adaptive Sensing Technology™ (AST™), with the industry's most advanced flow sensors such as FCI patented "FPC" flow element for compressed air flow and new "wet gas" sesnor to achieve a truly state-of-the-science flow metering solution for industrial processes and plant applications.The ST100A series transmitter is unsurpassed in meeting your current and future need for outputs, process information and communications. Whether your output needs are traditional 4-20 mA analog, frequency/pulse, or advanced digital bus communications such as HART, Foundation fieldbus, PROFIBUS, or Modbus, ST100A has you covered. ST100A's bus communications have been certified by and are registered devices with HART and Foundation Fieldbus. In addition, Emerson Process (Delta V), Yokogawa and ABB (800xA) (see page 6) have tested and verified ST100A Series' Foundation Fieldbus interoperability with their systems.  Then there's ST100A's display/readout, which brings new meaning to the term process information. Simply, the ST100A's graphical display provides the most comprehensive information on the process measurements and conditions of any thermal flow meter available - see the ST100A close-up page for all the details.To complete the solution, ST100A flow elements and process connections ensure the best possible measurements and effective installation. FCI flow element designs have been perfected and optimized through six decades of R&D and real world experience in thermal dispersion technology and flow metering applications. With thermal dispersion there are no moving parts to foul or clog. This results in the greatest reliability and valuable savings on maintenance.Fast response, accuracy, repeatability and long-life are hallmarks of FCI flow elements available with ST100A. And, all new are the STP models, which add pressure measurement. Mass flow, temperature and pressure in a single tap-point thermal dispersion meter… An industry first and FCI exclusive! Then, consider other ST100A Series exclusives like dual-element measuring systems and FCI’s patented VeriCal option that provides significant cost and time savings by performing dynamic calibration verification in-situ, without ever removing the instrument from the process. To ensure both ease of installation and a match with your process conditions, ST100A offers a comprehensive selection of process connections and installation options.

ST100A is high performance thermal dispersion technology gas flow meter that combines the most feature- and function- rich electronics, and innovations such as FCI patented Adaptive Sensing Technology™ (AST™), with the industry's most advanced flow sensors such as FCI patented "FPC" flow element for compressed air flow and new "wet gas" sesnor to achieve a truly state-of-the-science flow metering solution for industrial processes and plant applications.The ST100A series transmitter is unsurpassed in meeting your current and future need for outputs, process information and communications. Whether your output needs are traditional 4-20 mA analog, frequency/pulse, or advanced digital bus communications such as HART, Foundation fieldbus, PROFIBUS, or Modbus, ST100A has you covered. ST100A's bus communications have been certified by and are registered devices with HART and Foundation Fieldbus. In addition, Emerson Process (Delta V), Yokogawa and ABB (800xA) (see page 6) have tested and verified ST100A Series' Foundation Fieldbus interoperability with their systems.  Then there's ST100A's display/readout, which brings new meaning to the term process information. Simply, the ST100A's graphical display provides the most comprehensive information on the process measurements and conditions of any thermal flow meter available - see the ST100A close-up page for all the details.To complete the solution, ST100A flow elements and process connections ensure the best possible measurements and effective installation. FCI flow element designs have been perfected and optimized through six decades of R&D and real world experience in thermal dispersion technology and flow metering applications. With thermal dispersion there are no moving parts to foul or clog. This results in the greatest reliability and valuable savings on maintenance.Fast response, accuracy, repeatability and long-life are hallmarks of FCI flow elements available with ST100A. And, all new are the STP models, which add pressure measurement. Mass flow, temperature and pressure in a single tap-point thermal dispersion meter… An industry first and FCI exclusive! Then, consider other ST100A Series exclusives like dual-element measuring systems and FCI’s patented VeriCal option that provides significant cost and time savings by performing dynamic calibration verification in-situ, without ever removing the instrument from the process. To ensure both ease of installation and a match with your process conditions, ST100A offers a comprehensive selection of process connections and installation options.

ST80 is a high performance, rugged thermal dispersion technology air/gas flow meter that combines ultra-reliable, feature-rich electronics, and FCI innovations such as Adaptive Sensing Technology™ (AST™) with the industry's most extensive selection of application-matched flow sensors, including FCI's patented "FPC" sensor for compressed air and new "wet gas" flow element, to provide a truly superior solution for industrial processes and plant applications. The ST80 further combines these features with a robust, rugged transmitter enclosure and industry’s broadest selection of process connections to provide longest service life and ease-of-installation in your installation’s pipe or duct.The ST80 Series transmitter’s outputs are a match to your DCS, PLC, SCADA, recorder, or alarm system.  Whether your output needs are traditional 4-20 mA analog or advanced digital bus communications such as HART, Foundation Fieldbus, PROFIBUS PA, PROFIBUS DP, or Modbus, ST80 has you covered.  Then for local display, the ST80’s graphical, backlit LCD is unmatched in showing what’s happening in the pipe.  Flow rate, totalized flow, and temperature are continuously displayed in both a digital and bar graph presentation, while alarms and/or diagnostic messages will display as needed to alert operators.FeaturesDirect mass flow measuringFlow rate, totalized flow, temperatureNo moving parts, virtually no maintenancePatented AST™ thermal measuring modeProcess temperatures up to 850°F [454°C]Analog outputs and bus communicationsGlobal agency approvals for hazardous Ex installationsSIL 1 compliantGraphical multivariable LCD readout3-point in-situ calibration drift checkExclusive wet gas/rain shield sensor optionIntegral or remote mountingAluminum or stainless steel enclosures